As labor costs rise, maintenance issues become increasingly important. The use of easy-to-clean cinema seats is essential for easy management. Under normal use, most high-quality cinema seats do not need to be vacuumed, wiped, and cleaned on the back of the chair. Bolts and screws to prevent serious damage. The main feature of the self-folding chair is that it takes up less space and greatly simplifies the dust removal work on the ground. Normal cleaning procedures should include;

Cleaning of wooden surfaces:Wash with a diluted solution containing any household detergent such as Joy or Tide. Wipe with a clean, damp cloth and allow to dry. dry

Afterwards, apply a light wax to the clean dry cloth, light it and make it bright.

Cleaning of metal and plastic surfaces:It is also cleaned with a dilution of household detergent. If using a detergent such as Bon Ami or Ajnx. Then the scale or stain can be washed off. Rinse with water and dry with a clean, wrung cloth. When using a detergent such as Joy or Tide to clean the horizontal material (artificial leather, etc.), be sure to wipe it with warm cotton sponge or cloth. After using the detergent, use a soft brush to scrub. Household detergents are required to remove dirt or stains embedded in the seams. Wipe clean with a dry cloth before drying on the watch.

Fabric cleaning:To remove dust and loose dirt from the fabric, use a vacuum cleaner. Use M—o—Lene,Mistic foam cleaner or Joy,Tide and other household cleaners. Dilute the cream according to the instructions on the container and pour a small amount into the flat. Inside the dish, stir with a sponge or brush to form a thick layer of foam, then apply the foam to the fabric surface with a brush, sponge or Turkish towel, and only apply a small area on the fabric surface each time.

To prevent soaking, wipe it cleanly. Wipe the ice with a brush, sponge or a cloth dampened with lime. On wool fabrics, brush with a stiff brush along the direction of the hair several times. After drying, re-burn the ten bristles to restore the original condition.

In addition to fire stains and stains on textiles, clean them with a clean cloth and a small amount of recommended cleaning. Avoid the formation of frame spots due to the spread of stains. When working, you should make a circular motion from the four sides toward the center. Note: The volatile gases of these cleaning solutions, such as carbon tetrachloride, are very harmful if inhaled in large quantities; many solutions are the most highly flammable. Therefore, provide proper ventilation. Be sure to read the instructions carefully before using any kind of cleaner.

Gummy candy, asphalt and other stains:If it is soft, damp the gum or bitumen with carbon tetrachloride, kerosene or turpentine and scrape it off with a blunt knife. Then use a clean cloth to saturate the above liquid to gently control the remaining shifts. If you are using kerosene, wash it with warm soapy water after cleaning. If the gum or bitumen is dry and hard, crack it with dry ice, then scrape it off, and finally wipe off the residue with a solution.