First, the auditorium seat bag, office and other activities suitable for some metal parts regular lubricants, to keep the active parts soft.

Second, the back, handrails and the gaps of the seat joints of the cleaning debris vacuum cleaner. However, when using a vacuum cleaner, do not use a suction brush, in order to prevent damage to the fiber cloth woven fabric, and avoid the extra-attractive action that may cause the broken thread to be cleaned and also consider cleaning the small vacuum cleaner.

Third, the use of wet cloth cross maintenance, hard objects and acid, alkaline and other chemical products contact fabric, so as not to affect the surface quality and life cycle. If you open a drink, juice, first wipe the paper towel, then wipe it with warm water to dissolve the neutral detergent (note the moisture penetration prevention sponge), then wipe it with a soft cloth, and finally dry it at low temperature.

Fourth, the auditorium chair is generally used, the soft texture is beautifully maintained and gently wiped. If the contamination is used for a long time, the most ideal way: first wipe the neutral detergent (1~3) diluted with warm water, then Drain the clean water rag and wipe off the cleaning solution. After the final dry cloth, brush the teeth and take a proper amount of maintenance agent after wiping.

5. Wooden materials should be protected from drinking, chemical and overheated surfaces. Do not put on the natural color of the wooden surface; the leather absorbs strong, it is worth noting that the anti-fouling leather, the special cleaning agent for leather materials, should be used as a strong cleaning agent.

Sixth, the maintenance of metal materials using a soft cloth to wipe, avoid the use of rough, organic solvents (pine fat oil, in addition to dyeing oil), wet wipes, these are the main causes of surface scratches, making rust. Dry cotton yarn or fine cloth to maintain, light and beautiful.